As I mentioned in my last tutorial (Making gift boxes from old greetings cards – see them here) I am determined to be frightfully festive without all the nasty waste that often comes along with it! I really want to prove to myself (and other people) that you can be a happy Christmas Greenie as apposed to a whingy eco version of this guy…
So I decided I would get going on my sustainable decorations at the very start…. my front door. There aint nothing better than a wreath. I had seen plenty of amazing wreaths on Pinterest (follow me here) but was particularly inspired by this one which I saw at Proverbs 31 craft blog. It also suited me as I save all my toilet rolls (they are very handy for all sorts of crafts and around-the-house uses). So I set off on my merry way and I have to say I am really, really proud of the results! Considering I made this whole thing from what would be considered waste products (old cardboard box, newspaper, toilet rolls, fabric off-cuts) it really proves that one woman’s junk is anothers’ treasure.
- Toilet rolls (depending on how big your wreath is you will need quite a few).
- Cardboard (big enough to cut your wreath base out of – mine has a 40cms diameter)
- 2 x pieces of fabric off-cuts (minimum 80cms length) or fat ribbon
- Scissors and/or Stanley knife
- Hot Glue Gun
- Spray paint
1. First make your wreath template. I have seen plenty of blogs that suggest buying a Styrofoam template… there really is no need to use that nasty material. All you need is some cardboard and newspaper. I traced out a large salad bowl shape (40cms diameter) and then traced around a smaller bowl before cutting it out to create the donut shape (this is where a Stanley Knife would come in handy).
2. Then to give your wreath some central body I scrunched up newspaper and glued it onto the donut. This is going to covered in toilet roll rosettes so don’t worry if it looks shabby! Voila.. you have your recycled wreath template.
3. Then you need to cut your toilet roll rings. I wanted my wreath to be a really pretty textural wreath with all different levels and lengths of rosettes. Therefore I cut my toilet rolls into thirds, fourths and fifths. You don’t have to rule these you can just cut away – it doesn’t need to be perfect.
Note: If you don’t have many toilet rolls you may want to cut the roll into fifths so that you get more bang for your buck out of each roll.
4. Once you have your rings you will make them into rosettes. Cut the ring to open them up and then roll. Again I varied rolling them very tightly and loosely.5. Now it’s time to start gluing the rosettes to your wreath. Blob hot glue onto the newspaper and press the rosettes onto them. I started by using the taller rosettes (the ones I had cut from thirds) and gluing them around the centre of the ring. I tried to angle them so the centre of the rosettes weren’t all just facing up and were looking in different directions (for added visual interest). At times you will need to dob bits of glue in between them so the rosettes use each other for added structure.
Once I had the taller central ring of rosettes I started gluing in the shorter ones around the edges until the wreath was completely covered.
Don’t worry if your wreath looks very grim at the beginning… persevere! The more you build the better and better it gets I promise…
6. I actually really like the toilet rolls left in their natural state… I think they looked deliciously rustic… but I also really felt the need for some sparkle. So I used some old spray paint I had left over from another project and gave the wreath a really fine spray until it was a creamy brown colour. One positive is that this will seal the wreath and protect it for next year!
Aerosols are unfortunately not great for the environment but you can get your hands on ‘friendlier’ alternatives for projects that really do require them. I favour Krylon’s H20 Latex Spray Paint (see the treehugger write up here) – it is an environmentally better option although sadly still not perfect. Here are some places you can get them in Australia.
7. While the paint was still wet I dusted some left over glitter onto the wet wreath. Fairy dust makes all the difference. Let the wreath dry.
8. Once your wreath has dried it is time to tie the bow onto it. I used fabric off-cuts though you could also use a fat ribbon if you do not have any. The pieces I used were very thick (approx 15cms) and therefore I needed them to be minimum 80cms long.
Tie the first piece around the top of your wreath – tie the knot tight as this will be what your wreath hangs from so you want it to be secure. Then thread the other piece between it and the toilet rolls. Tie a bow and fluff it up appropriately.Then cut the ribbon tails to the perfect size. The bow may take a couple of goes to get right.
I then quickly sewed the ends of the material together to form a loop and cut a small slice into the ribbon so that I could hang it on a screw in our door…
8. Merrily hang on your door while humming “Deck the halls”… because tis the season to be jolly! Be sure to take a step back and admire your wonderful crafty work!